Home > Basic Questions 2

Basic Questions 2

November 24th, 2018 Go to comments

Question 1


MDI stands for “Medium Dependent Interface”. MDI is a type of Ethernet port found on network devices. When connecting two devices with MDI ports (two hosts, for example) an Ethernet crossover cable is required. The crossover cable switches the send and receive ports on the two connectors, allowing data to flow correctly between two MDI ports.

Question 2


Physical addresses or MAC addresses are used to identify devices at layer 2 -> A is correct.

MAC addresses are only used to communicate on the same network. To communicate on different network we have to use Layer 3 addresses (IP addresses) -> B is not correct; E is correct.

Layer 2 frame and Layer 3 packet can be recognized via headers. Layer 3 packet also contains physical address -> C is not correct.

On Ethernet, each frame has the same priority to transmit by default -> D is not correct.

All devices need a physical address to identify itself. If not, they can not communicate -> F is not correct.

Question 3

Question 4


Only router can break up broadcast domains but in this exhibit no router is used so there is only 1 broadcast domain.

For your information, there are 7 collision domains in this exhibit (6 collision domains between hubs & switches + 1 collision between the two switches).

Question 5


Use an Ethernet straight-through cable to connect an medium dependent interface (MDI) to an MDI-X port. Use a cross-over cable to connect an MDI to an MDI port, or an MDI-X to an MDI-X port.

Reference: https://www.cisco.com/c/en/us/td/docs/security/asa/hw/maintenance/5505guide/ASA5505HIG/pinouts.html

Note: MDI/MDIX is a type of Ethernet port connection using twisted pair cabling.

Question 6


Verify that the TFTP or RCP server has IP connectivity to the router. If you cannot successfully ping between the TFTP or RCP server and the router, do one of the following:
– Configure a default gateway on the router.
– Make sure that the server and the router each have an IP address in the same network or subnet.

Reference: https://www.cisco.com/c/en/us/td/docs/routers/access/1900/software/configuration/guide/Software_Configuration/upgrade.html

The first option implies the router can be in a different subnet from the TFTP server -> D is not correct.

TFTP has no encryption process so answer B is correct.

Question 7


At the end of each frame there is a Frame Check Sequence (FCS) field. FCS can be analyzed to determine if errors have occurred. FCS uses cyclic redundancy check (CRC) algorithm to detect errors in the transmitted frames. Before sending data, the sending host generates a CRC based on the header and data of that frame. When this frame arrives, the receiving host uses the same algorithm to generate its own CRC and compare them. If they do not match then a CRC error will occur.


The “Type/Length” field is used to indicate the “Type”of the payload (Layer 3 protocol) which is indicated as a Hexadecimal value.

Note: Ethernet II uses “Type” while the old Ethernet version use “Length”

Question 8

Question 9


Single-mode fiber allows only one mode of light to propagate. Because of this, the number of light reflections created as the light passes through the core decreases, lowering attenuation and creating the ability for the signal to travel further. This application is typically used in long distance, higher bandwidth.

Because of the high dispersion and attenuation rate with multimode fiber cable, the quality of the signal is reduced over long distances.

Reference: https://www.multicominc.com/training/technical-resources/single-mode-vs-multi-mode-fiber-optic-cable/

In fact it is difficult to say what the maximum distance of single-mode or multimode fiber but according to this link (table 1):


Single-mode cable is good for installations longer than 10km.

At present, there are four kinds of multi-mode fibers: OM1, OM2, OM3 and OM4. The letters “OM” stand for optical multi-mode. OM3 and OM4 fibers will support upcoming 40 and 100 Gb/s speeds.

Comments (50) Comments
Comment pages
  1. niki
    June 26th, 2018

    Hey, why don’t you all just buy the dumps and support the creators? Why did I pay 15 bucks to send them to you for free? Am I an IDIOT?

  2. Bysl
    July 20th, 2018

    Please send me the latest dump CCNA 200-125 to me if you’ll have, I am preparing for CCNA exam.

    Email: bilge__93(@)hotmail.com

  3. bekim
    July 25th, 2018

    hi , im a member how do i get the latest dumps

  4. Marty
    July 28th, 2018

    Can I get the latest dumps please at {email not allowed}

    Thank you in advance!

  5. @niki
    July 28th, 2018

    Well said niki! Support the developers!

  6. NANA
    August 9th, 2018

    http:/ / t.cn / RDf8DJW
    I passed the exam. I only looked at the contents of it. Most of the questions are in it. It is worthy of trust.

  7. Anonymous
    August 9th, 2018

    niki ashole send me the dumps

  8. maro
    August 9th, 2018

    For free all sims and 171q ,58q ,last valid dump and pdf and vce with vce player (just remove # from the below link)

  9. Anonymous
    August 11th, 2018


    I can not access into the resource and Paid for it, please let me know what I can do to access into this.

  10. I f
    August 16th, 2018

    Can i get the latest dumps, please?

  11. Mohammed
    August 19th, 2018

    Hey maro
    Download is not working, could you please check?

  12. meetmus2fa
    August 22nd, 2018

    Which statement about upgrading a Cisco IOS device with TFTP server?
    A. the operation is performed in active mode
    B. the operation is performed in unencrypted format
    C. the operation is performed in passive mode
    D. the Cisco IOS device must be on the same LAN as the TFTP server

    Here it says B but in Dump it Says D….Can any one confirm which is correct.

  13. Kevin
    August 23rd, 2018


    B and D are both correct, but D is a better answer. Take a look at the explanation of Leonardo from the official Cisco forum.


  14. Kevin
    August 23rd, 2018

    @meetmus2fa if you’re using vce you can edit the answer by using the VCE Designer. It’s an easy task :D

  15. Anonymous
    September 7th, 2018

    Someone pls send the dumps. {email not allowed}

  16. majed
    September 13th, 2018

    guys pls i need a last dump or a new version for ccna 200-125
    can you sent on my email ( majed.qr19//////@//////gmail//////.com

  17. BG21121
    September 17th, 2018

    Please help!! can someone send the latest dump thank you so much! balongoffice123(at)gmail(.com)

  18. Anonymous
    September 27th, 2018

    Someone pls send the dumps evgeniy.vlog@gmail com

  19. mia
    September 30th, 2018

    Please share me the latest dumps for CCNA 200-125 to {email not allowed}

  20. DAVE
    October 3rd, 2018

    Hei fellow colleagues please my exams is just this coming 16th of this month.
    can someone help me with the current dump on this email
    yankson p7@gmail. com

  21. O my
    October 9th, 2018

    In question 2, you explain that: Layer 3 packet also contains physical address -> C is not correct.
    Can you show where in layer 3 packet does mac-addresses appear?
    I always read that layer 3 contains IP or IPv6 address, and that mac-addresses appear in the frame headers

  22. Phil
    October 10th, 2018

    Does anyone understand, in question 8, why option A (UDP can transmit data at a rate higher than the path capacity) is true? I’ve never heard of that.

  23. Sebas
    October 10th, 2018

    Hi guys can someone send me the latest dumbs pls at (sn////herrera27///@gmail//////.com).

  24. Daniel Ogwang
    October 30th, 2018

    Can someone assist me with the latest CCNA composite dump, send to albanet.ict @ gmail.com

  25. Ammar khan
    November 1st, 2018

    someone please send me CCNA 200-125 latest valid dumps email:{email not allowed}

  26. Osmann
    November 3rd, 2018

    Hi Guys
    Please forward me CCNA dump I am student //// sinemaci1 @ gmail . com ////

  27. Yailin Lopez
    November 11th, 2018

    Please forward me CCNA dump I am student //// yailinla27 @ gmail . com ////

  28. Gamma 2
    November 11th, 2018

    please help me with the latest CCNA exam document.

    ///fasikasol @ gmail . com//
    I appreciate your time.
    bless you.
    from Madagascar

  29. Nicholas
    November 13th, 2018

    Can someone explain me what do we call dumps?

  30. Sharon
    November 14th, 2018

    I am writting my exam soon please guys assist me with the latest dump 200-125 : sharonsehlako .21 @gmail .com please put it together

    Thanks in advance

  31. Hasho
    November 14th, 2018

    Which statement about upgrading a Cisco IOS device with TFTP server?
    A. the operation is performed in active mode
    B. the operation is performed in unencrypted format
    C. the operation is performed in passive mode
    D. the Cisco IOS device must be on the same LAN as the TFTP server

    D is incorrect, its not a must to have the tftp server on the same LAN with the router, they can be on different broadcast domains as long as you have the routing in place.

  32. Anonymous
    November 18th, 2018

    Can anyone send me latest dump file for CCNA R & S 200-125

    my email id is {email not allowed}

  33. Mariam Khan
    November 23rd, 2018

    I can’t seem to find practice questions. Where are the questions to these explanations ?

    November 30th, 2018

    PLEASE I NEED LASTEST DUMPS .. {email not allowed}

    December 3rd, 2018

    can any one please forward me the questions
    {email not allowed}

    December 3rd, 2018

    can any one please forward me the questions ibrahimhassan363(at)gmail(.com)


  37. Anonymous
    December 4th, 2018

    please send me dumps. salih_aksoy_1985(at)mynet(.com)

  38. shakil
    December 5th, 2018

    please send me latest dump file 200-125 {email not allowed}

  39. Rick Sanchez C-137
    December 8th, 2018

    In need of 200-125 dumps please b.johnso567 at gmail (dot) com i have my test in a week!

  40. william
    December 12th, 2018

    Can anyone share the latest CCNA dumps at bullscashonline18 att gmail dot com
    That would be really helpful!!!

    I am going to sit for exam in the last of this exam…
    i will be really thankful to guys,,,,,

  41. Nomi
    December 12th, 2018

    hi everyone, please send me latest CCNA DUMPS for 200-125 at {email not allowed}

  42. nomi
    December 12th, 2018

    email id is nomi7677 at yahoo (dot) com. Please share CCNA dumps for 200-125 as I have my exam in 10 days. thanks

  43. kavin
    December 13th, 2018

    Hi please can any one share the latest dump 200-125 {email not allowed}

  44. Anonymous
    December 14th, 2018

    Merry Christmas and Happy Holidays!
    Could someone share some Holiday spirit by sending me the latest dumps to…
    rarepepechickin (at) gmail (dot) com

  45. Rick
    December 27th, 2018

    Can someone please send me the latest CCNA dumps for 200-125 dump to morrick738 at gmail dot com ( My Exam is in 12 days. Thanks! )

  46. Norld
    January 2nd, 2019

    Clear my Test with Excellent marks.

    config labs : ospfv3 and vlan
    trouble shoot lab : dhcp, rip , eigrp gre
    drag and drop BGP , tcp udp protocols

    At web :

  47. Wanderr
    January 2nd, 2019

    Would someone be kind and send me the updated CCNA dumps to {email not allowed}. i am taking the test next week.


  48. Surke
    January 2nd, 2019

    Merry Christmas!

    Could someone share the latest dumps to…

    barbarians123 (at) mail (dot) com

    THank you so much

  49. Wanderr
    January 2nd, 2019

    Opp! Must of been asleep.
    Would someone be kind and send me the updated CCNA dumps to r.enders at students.clark.edu . i am taking the test next week.

  50. FJ
    January 3rd, 2019

    Hello, can anyone send me the latest CCNA dumps to {email not allowed} ? I am taking the exam tomorrow, so the matter is urgent. Thank you very much in advance! You are great!

Comment pages
Add a Comment