Home > TCP and UDP Tutorial

TCP and UDP Tutorial

September 20th, 2016 Go to comments

The Transmission Control Protocol (TCP) and User Datagram Protocol (UDP) are the two most popular protocols in the transport layer. They ensures that messages are delivered error-free, in sequence, and with no losses or duplication. The key difference between TCP and UDP is that TCP provides a wide variety of services to applications, whereas UDP does not. At the result of this, TCP is much more complex than UDP so this tutorial is dedicated to explore TCP in detail but we still compare them.


Both TCP and UDP are protocols at the Transport layer (of both OSI and TCP/IP model) but why we need both of them? The answer is:

+ TCP is slower but reliable
+ UDP is faster but unreliable

In most cases we will want to be reliable in web accessing, email communicating, file uploading… as we don’t expect a few corrupted packets would destroy our whole work. With TCP, these corrupted packets will be resent or repaired to make sure everything is correct. Yes, TCP is really nice to ensure your work is accurate!

But with a price…

To guarantee the sending segments is free of error, TCP adds some bits for tracking and checking purpose so that the other end can verify and ask for missing pieces of segments. As a result of this, the segments become larger, consume more bandwidth and CPU resources to proceed.

Although UDP cannot guarantee everything is accurate like TCP but UDP is faster than TCP because it does not require additional bits for tracking and checking purpose. So which tasks need speed? Video (streaming) and audio are ideal for this task because they are considered real-time applications. Suppose you are talking to your friend, surely you want your voice to reach your friend without any delay. It would be very weird if your friend can only hear your voice after a few seconds.

Note: Segment is the name of the data packet at Transport layer

TCP can also slow down the transmission if it sees the path to the destination is too crowded. You don’t want TCP to slow down your voice in traffic-jam hours either. For example when you say “Hello, how are you?”, your friend at the other end may hear “Hellooooo,…… hooooooooow arrrrrrrre yyyyyoou”. What is an awful conversation!

Losing a few packets for voice or video is acceptable. For example if you say the word “Hello” in one second, an IP phone generates about 25 to 100 packets (just an estimation, it depends on the codec and sampling frequency) so your friend can still understand what you say even if a few packets are missing. Moreover, re-transmission the missing packets is not useful as voice and video are real-time applications and the receiving end cannot wait for the missing segments to be resent.

So now we have some basic understanding of TCP and UDP. In the next part we will learn more about TCP. Let’s start with how TCP set up and terminate a connection.

TCP three-way handshake (to start the communication)

Suppose host A wants to start communicating with host B using TCP. Before they can send real data, a three-way handshake must be established first. Let’s see how this process takes place:


1. First host A will send a SYN message (a TCP segment with SYN flag set to 1, SYN is short for SYNchronize) to indicate it wants to setup a connection with host B. This message includes a sequence (SEQ) number for tracking purpose. This sequence number can be any 32-bit number (range from 0 to 232) so we use “x” to represent it.

2. After receiving SYN message from host A, host B replies with SYN-ACK message (some books may call it “SYN/ACK” or “SYN, ACK” message. ACK is short for ACKnowledge). This message includes a SYN sequence number and an ACK number:
+ SYN sequence number (let’s called it “y”) is a random number and does not have any relationship with Host A’s SYN SEQ number.
+ ACK number is the next number of Host A’s SYN sequence number it received, so we represent it with “x+1”. It means “I received your part. Now send me the next part (x + 1)”.

The SYN-ACK message indicates host B accepts to talk to host A (via ACK part). And ask if host A still wants to talk to it as well (via SYN part).

3. After Host A received the SYN-ACK message from host B, it sends an ACK message with ACK number “y+1” to host B. This confirms host A still wants to talk to host B.

If you are still unclear about this process, let’s assign: x = 1 and y = 50:


In this process, three messages need to be sent so we often call it “three-way handshake”.

Nice, now you really understand TCP three-way handshake, right? Host A can start sending real traffic to host B after the three-way handshake process.

TCP also does nearly the same thing when one end wants to terminate the connection with TCP four-way termination process.

TCP four-way termination (to end the communication)


Suppose Host A wants to end the connection to host B, Host A will send a FIN message (a TCP segment with FIN flag set to 1), FIN is short for FINISH. The purpose of FIN message is to enable TCP to gracefully terminate an established connection. Host A then enters a state called the FIN-WAIT state. In FIN-WAIT state, Host A continues to receive TCP segments from Host B and proceed the segments already in the queue, but Host A will not send any additional data.

Device B will confirm it has received the FIN message with an ACK (with sequence x+1). From this point, Host B will no longer accept data from Host A. Host B can continue sending data to Host A. If Host B does not have any more data to send, it will also terminate the connection by sending a FIN message. Host A will then ACK that segment and terminate the connection.

TCP requires to establish and terminate the connection before and after exchanging real traffic so it is called connection-oriented protocol. UDP does not support these features so it is called connectionless protocol.

More formally, these terms can be defined as follows:
+ Connection-oriented protocol: requires a logical connection to be established between the two processes before data is exchanged
+ Connectionless protocol: allow data to be exchanged without setting up a link between processes

In conclusion, TCP requires the establishment (via three-way handshake) and termination (via four-way termination) of a connection. In the next part we will learn about popular TCP features.

Comments (50) Comments
Comment pages
1 2 3 6 2834
  1. Y
    September 20th, 2016

    Nice Tutorial … Thanks 9tut.com :)

  2. Anonymous
    September 20th, 2016

    Great Tutorial, Thanks

  3. Anonymous
    September 22nd, 2016

    Great tutorial indeed thanks!

  4. Anonymous
    September 22nd, 2016


  5. Anonymous
    September 23rd, 2016

    useful thanks..

  6. Anonymous
    September 24th, 2016


  7. Anonymous
    September 26th, 2016

    Good explanation

  8. jerry
    September 26th, 2016

    good learning tutorial

  9. Anonymous
    September 26th, 2016

    CCNA ( Routing & Switching )
    CCNA Routing and Switching provides comprehensive coverage of network topics from fundamental to advanced applications and services, with opportunities for hands on practical experience and career skills development.
    Prerequisite :
    Basic Knowledge of Computer/ Network
    Further details we can discuss on call or whatsapp

  10. rowell
    September 26th, 2016

    nice tutorial great thanks

  11. Runner
    September 30th, 2016

    Thanks 9tut! :D

  12. Anonymous
    October 4th, 2016

    Very Informative!

  13. lordindia
    October 4th, 2016

    very helpful
    we are providing preparation for passing CCNA exam
    further information 0537461244

  14. Jay
    October 6th, 2016

    broken down an simplified to easy thank you for the tutorial

  15. Jac
    October 7th, 2016

    Nice Tut. understandable, clear.

  16. Anonymous
    October 8th, 2016

    Thanx 9tut

  17. Anonymous
    October 9th, 2016

    Please send latest 640-911 DCICN & 640-916 DCICT as well as dumps to steel_bender @ yahoo com


  18. Anonymous
    October 9th, 2016

    Please send latest 640-911 DCICN & 640-916 DCICT as well as CCNA dumps to steel_bender @ yahoo com


  19. CCNA-new
    October 11th, 2016

    62 Qs file is 100% striking in exam right now.
    Get at below link

    ccna200-125dumps.blog s p o t . c o m

  20. Anonymous
    October 12th, 2016

    It helps a lot

  21. Anonymous
    October 30th, 2016

    Nice to read and understand

  22. Krishna
    November 2nd, 2016

    useful tutorial and thanks

  23. Anonymous
    November 5th, 2016

    Sorry to bother you! Mời các bạn tham khảo thêm tại lotsanvietthai.com

  24. Anonymous
    November 8th, 2016

    excelente manual muy completo

  25. Anonymous
    November 9th, 2016

    Hello Sir your website it is good , But could not download

  26. fakhri
    November 14th, 2016

    awesome 9tut………….

  27. Anonymous
    November 15th, 2016

    I really appreciate your efforts in making this tutorials comprehensive

  28. Maxine
    November 18th, 2016

    I had experience to use resources like https://www.mrcerts.com/JK0-022-test.html and must confess that going through simulation questions can really help at the certification exam.

  29. jk
    November 24th, 2016

    Nalla irukkungo

  30. Sempifi99
    November 30th, 2016

    Great job, not too long or broad. I just came across this site and will be bookmarking.

  31. Anonymous
    December 4th, 2016

    In this article https://kb.iu.edu/d/ajmi

    It says that when a termination process has begun, the host A sends both a sequence number and an acknowledgement number. Different from above, Im now confused. ?.?

  32. Anonymous
    December 5th, 2016

    Great information and easy to follow.

  33. Alsleak
    December 7th, 2016

    It is incredible work

    All the best

  34. rt
    December 12th, 2016

    please send CCNA-200-125 latest dumps to my email {email not allowed}

  35. CCNA-v3
    December 15th, 2016

    Guys finally passes today 171q is super valid
    Lab acl mod 3 host , ospf , dhcp Ntp, ripv2

    Dumps at below webpage: remover asteriks

  36. Anonymous
    December 16th, 2016

    great tutorial
    but I have one querry that how one can define or configure that Iam going to use a TCP protocol not a UDP protocol for tranferring my data

  37. Zoe Bird
    December 19th, 2016

    Thanks Mexine
    it really very helpful me a good test. This is simulation of exam :) :) :) :)

  38. ccna try
    December 21st, 2016

    Can i have the latest ccna dumps please.
    My e-mail address is g r i z l i @ b l i c . n e t — no spaces

  39. Praveen
    December 30th, 2016

    Can anyone please send latest ccna 200-125 dumps to praveenkumar369 @ gmail.com

  40. FLOK
    December 30th, 2016

    {email not allowed}

  41. hi can any send the latest dumps 200-125 to phawloumendoza@gmail.com thanks
    January 3rd, 2017

    hi can any send the latest dumps 200-125 to {email not allowed} thanks

  42. Chahal
    January 19th, 2017


  43. Anonymous
    January 31st, 2017

    Thanks 9tut!

  44. Anonymous
    February 1st, 2017

    can anyone help with Cisco V3 materials andersoncisco2020 @ yahoo com please

  45. Kove
    February 2nd, 2017

    thanks a lot tut

  46. wdasaheb
    February 6th, 2017

    can anyone help me by last exam 200_125 wdasaheb @ hotmail com please

  47. Anonymous
    February 13th, 2017

    hi guys how are all.can someone please help me with chapter2 exam questions and answer (Explore the network)

  48. Nivasen2005
    February 14th, 2017

    Hi Guys, I’m keen to take this exam and learn but cant afford the official cert. guide/book. Can somebody assist with en ebook copy {email not allowed}

  49. GifaKing
    February 16th, 2017

    Please send latest 640-911 DCICN & 640-916 DCICT as well as CCNA dumps to {email not allowed}

  50. GifaKing
    February 16th, 2017

    Please send latest 640-911 DCICN & 640-916 DCICT as well as CCNA dumps .

Comment pages
1 2 3 6 2834
Add a Comment